2 HP Electric Gear Drive Top Entry Mixer with Hydrofoil

2 HP Electric Gear Drive Top Entry Mixer with Hydrofoil Image

Model Number: TM-200

Part Number: 21Q2508

Versatile gear-driven top mount mixers are utlized to agitate low viscosity liquids in large volumes or higher viscosities in lower volumes.  Industries using top mounted mixers include waste water, chemicals, paint & coatings, petroleum, adhesives and many more.  The 2 HP INDCO TM-200 mixer mounts to a support structure or mounting surface above the tank via four bolts and features a right angle 15:1 gear reducer.   The 1 ½” X 84” long 316 stainless steel shaft rotates 118 rpm.  The standard 27” hydrofoil impeller is secured to the shaft using set screws and keyway with gib key to prevent rotational and vertical movement.  The mixer requires 230/460 Volt three phase phase power.  This mixer is ideal for batch production or continuous processes.  All wetted parts are 316 SS standard for chemical resistance.  Customizations include gear ratio, shaft length, alternate impeller options, variable speed control and washdown or outdoor duty mechanical component finishes.  Hastelloy C and other alloys are available as needed for wetted parts.  Contact our engineers to assist with sizing and configuring the mixer to your application. 

Motor

Impeller

Mount

Shaft

General

Model Number: TM-200

Versatile gear-driven top mount mixers are utlized to agitate low viscosity liquids in large volumes or higher viscosities in lower volumes.  Industries using top mounted mixers include waste water, chemicals, paint & coatings, petroleum, adhesives and many more.  The 2 HP INDCO TM-200 mixer mounts to a support structure or mounting surface above the tank via four bolts and features a right angle 15:1 gear reducer.   The 1 ½” X 84” long 316 stainless steel shaft rotates 118 rpm.  The standard 27” hydrofoil impeller is secured to the shaft using set screws and keyway with gib key to prevent rotational and vertical movement.  The mixer requires 230/460 Volt three phase phase power.  This mixer is ideal for batch production or continuous processes.  All wetted parts are 316 SS standard for chemical resistance.  Customizations include gear ratio, shaft length, alternate impeller options, variable speed control and washdown or outdoor duty mechanical component finishes.  Hastelloy C and other alloys are available as needed for wetted parts.  Contact our engineers to assist with sizing and configuring the mixer to your application. 

Motor

Impeller

Mount

Shaft

General


$5,507.00
Approx. Lead Time
20 Business Days
* Orders in quantity or with other items may extend lead times.
Add To Cart

Suggested Products