1/2 HP Electric Heavy Duty Gear Drive Flange Mount Mixer

1/2 HP Electric Heavy Duty Gear Drive Flange Mount Mixer Image

Model Number: FMG-050T

Part Number: 21Q2756

INDCO's deluxe Heavy Duty Flange Mount Mixers are an excellent choice for mixing in large scale process vessels or anywhere sealed mixing is required.  Simply the best value in the industry for this type of the mixer, the FMG-050T model features a 304 stainless steel 4" ANSI flange mount design and a dry-running mechanical seal rated 125 psi to full vacuum.  This 1/2 HP totally-enclosed fan cooled model is ready to plug into a standard outlet. The motor requires 115/230 volt, 60 Hz single phase power, and is connected to the 1-1/4" diameter x 48" long mixing shaft by a stainless steel coupler.  A heavy duty bearing adds support to maximize shaft stability.  The 10:1 gear reducer vigorously agitates large volumes of light viscosity materials at 175 RPM.  At the end of the mixing shaft is a 18" diameter, 3-blade hydrofoil which attaches to the shaft with set screws and provides outstanding fluid velocity.  All wetted parts are 316 SS for chemical resistance.  This electric model features an ABB or an equivalent brand motor.  Many custom options are available for our Heavy Duty Flange Mount Mixers including washdown duty, explosion proof or stainless steel motors, variable speed control (VFD), customized seals, special shafts and alternate impellers.  Please contact one of our engineers to quote your specific application needs.

Motor

Horsepower 1/2
Motor Enclosure Totally Enclosed Fan Cooled
MotorRPM 1750
Motor Type Electric
Baldor Model or Equivalent VL3504
Boston Model or Equivalent HF721R-10Z-B5-H-P20
Motor Frame 56C Face
Motor Exterior Painted
Rotation Top Wired Clockwise
Phase Single
Voltage 115/230
Hertz 60
FL Amps 7.4:3.7
ServiceFactor 1.00
InsulationClass B
Drive Gear Reduced
Gearbox Ratio 10:1
Gearbox RPM 175
Gearbox Design Right Angle

Impeller

Quantity 1
Diameter 18"
Style Hydrofoil
Bore 1-1/4"
Rotation Left Hand
Material Construction 316 Stainless Steel
Blade Construction Welded
Set Screw 2
Surface Finish Mill Finish

Mount

Construction 304 Stainless Steel
Features 4" ANSI
Seal 125 PSI Mechanical Seal

Shaft

Exposed Dimensions 1-1/4" x 48"
Construction 316 Stainless Steel

Model Number: FMG-050T

INDCO's deluxe Heavy Duty Flange Mount Mixers are an excellent choice for mixing in large scale process vessels or anywhere sealed mixing is required.  Simply the best value in the industry for this type of the mixer, the FMG-050T model features a 304 stainless steel 4" ANSI flange mount design and a dry-running mechanical seal rated 125 psi to full vacuum.  This 1/2 HP totally-enclosed fan cooled model is ready to plug into a standard outlet. The motor requires 115/230 volt, 60 Hz single phase power, and is connected to the 1-1/4" diameter x 48" long mixing shaft by a stainless steel coupler.  A heavy duty bearing adds support to maximize shaft stability.  The 10:1 gear reducer vigorously agitates large volumes of light viscosity materials at 175 RPM.  At the end of the mixing shaft is a 18" diameter, 3-blade hydrofoil which attaches to the shaft with set screws and provides outstanding fluid velocity.  All wetted parts are 316 SS for chemical resistance.  This electric model features an ABB or an equivalent brand motor.  Many custom options are available for our Heavy Duty Flange Mount Mixers including washdown duty, explosion proof or stainless steel motors, variable speed control (VFD), customized seals, special shafts and alternate impellers.  Please contact one of our engineers to quote your specific application needs.

Motor

Horsepower 1/2
Motor Enclosure Totally Enclosed Fan Cooled
MotorRPM 1750
Motor Type Electric
Baldor Model or Equivalent VL3504
Boston Model or Equivalent HF721R-10Z-B5-H-P20
Motor Frame 56C Face
Motor Exterior Painted
Rotation Top Wired Clockwise
Phase Single
Voltage 115/230
Hertz 60
FL Amps 7.4:3.7
ServiceFactor 1.00
InsulationClass B
Drive Gear Reduced
Gearbox Ratio 10:1
Gearbox RPM 175
Gearbox Design Right Angle

Impeller

Quantity 1
Diameter 18"
Style Hydrofoil
Bore 1-1/4"
Rotation Left Hand
Material Construction 316 Stainless Steel
Blade Construction Welded
Set Screw 2
Surface Finish Mill Finish

Mount

Construction 304 Stainless Steel
Features 4" ANSI
Seal 125 PSI Mechanical Seal

Shaft

Exposed Dimensions 1-1/4" x 48"
Construction 316 Stainless Steel

$4,231.50
Approx. Lead Time
20 Business Days
* Orders in quantity or with other items may extend lead times.
Add To Cart

Suggested Products