3 HP Electric Direct Drive Plate Mount Mixer

3 HP Electric Direct Drive Plate Mount Mixer Image
3 HP Electric Direct Drive Plate Mount Mixer - image 1
3 HP Electric Direct Drive Plate Mount Mixer - image 2

Model Number: TMD-7

Part Number: 21Q2596

INDCO's Top Entry Plate Mount Mixer is designed to mount on a beam or channel over an open or closed tank operated under atmospheric conditions. These heavy duty models can mix various applications in batches up to 2000 gallons. A carrier bearing mounted at the mounting plate offers maximum shaft support and reduced motor wear.
This 3 HP electric model operates at 1750 RPM and is equipped with motor leads only. The totally-enclosed fan cooled motor requires three phase 230/460 voltage. The 72" shaft attaches to the motor coupler and one 7" 3-blade square pitch impellers with set screws. All wetted parts are 316 stainless steel for chemical resistance. This electric model features an ABB or an equivalent brand motor.

Motor

Impeller

Mount

Shaft

General

Model Number: TMD-7

INDCO's Top Entry Plate Mount Mixer is designed to mount on a beam or channel over an open or closed tank operated under atmospheric conditions. These heavy duty models can mix various applications in batches up to 2000 gallons. A carrier bearing mounted at the mounting plate offers maximum shaft support and reduced motor wear.
This 3 HP electric model operates at 1750 RPM and is equipped with motor leads only. The totally-enclosed fan cooled motor requires three phase 230/460 voltage. The 72" shaft attaches to the motor coupler and one 7" 3-blade square pitch impellers with set screws. All wetted parts are 316 stainless steel for chemical resistance. This electric model features an ABB or an equivalent brand motor.

Motor

Impeller

Mount

Shaft

General


$4,034.50
Approx. Lead Time
5 Business Days
* Orders in quantity or with other items may extend lead times.
Add To Cart

Suggested Products