1-1/2 HP Air Gear Drive Drum Bung Hole Entering Clamp Mixer

1-1/2 HP Air Gear Drive Drum Bung Hole Entering Clamp Mixer Image
1-1/2 HP Air Gear Drive Drum Bung Hole Entering Clamp Mixer - image 1
1-1/2 HP Air Gear Drive Drum Bung Hole Entering Clamp Mixer - image 2
1-1/2 HP Air Gear Drive Drum Bung Hole Entering Clamp Mixer - image 3

Model Number: CBG-1A

Part Number: 21A5141

INDCO's CBG series mixers, featuring a 5:1 gear ratio, are designed for use on either a closed or open steel drum of medium to high viscosity materials such as heavy paints, resins and polymers. The unique clamp adjusts to the rim of the drum with the hand knob and sits at an angle such that it will enter through a 2" drum lid bung. This 1-1/2 HP air motor provides maximum agitation when supplied with 100 PSI @ 70 CFM. See our air motor performance guide for operation at lower air flow. The air flow valve allows speed control from 60-600 RPM. The collapsible impellers fit through the 2" opening and expand to 7" in diameter when in operation. The 32" long mixing shaft attaches to the motor coupler and three 7" impellers with set screws. All wetted parts are made of stainless steel for chemical resistance. This model features a Gast air motor which is known for its rugged construction and reliability. Air motors deliver variable speed for maximum flexibility or multiple applications. They are lighter weight than our electric models and reduce the possibility of explosion in a combustible environment.

Motor

Impeller

Mount

Shaft

General

Model Number: CBG-1A

INDCO's CBG series mixers, featuring a 5:1 gear ratio, are designed for use on either a closed or open steel drum of medium to high viscosity materials such as heavy paints, resins and polymers. The unique clamp adjusts to the rim of the drum with the hand knob and sits at an angle such that it will enter through a 2" drum lid bung. This 1-1/2 HP air motor provides maximum agitation when supplied with 100 PSI @ 70 CFM. See our air motor performance guide for operation at lower air flow. The air flow valve allows speed control from 60-600 RPM. The collapsible impellers fit through the 2" opening and expand to 7" in diameter when in operation. The 32" long mixing shaft attaches to the motor coupler and three 7" impellers with set screws. All wetted parts are made of stainless steel for chemical resistance. This model features a Gast air motor which is known for its rugged construction and reliability. Air motors deliver variable speed for maximum flexibility or multiple applications. They are lighter weight than our electric models and reduce the possibility of explosion in a combustible environment.

Motor

Impeller

Mount

Shaft

General


$2,293.50
Approx. Lead Time
2 Business Days
* Orders in quantity or with other items may extend lead times.
Add To Cart

Suggested Products