Heavy-Duty Stainless Steel Lid IBC Tote Mixer 2 HP EP Gear Drive Electric
Model Number: STL-200E
Part Number: 21A5520
The INDCO STL-series mixer is designed for mixing liquid products in stainless steel intermediate bulk containers (IBC’s), or “totes”. Inspired by the many unique mixers created for our customers for this purpose, STL mixers can be configured to process liquids with a wide range of properties and meet many operational requirements. The STL-200E is our 2 HP electric model and is 10:1 gear reduced. The 2 HP electric motor model is an explosion proof motor and requires three phase 230/460 voltage. This unit is equipped with motor leads only and operates at 175 RPM. The model includes a stainless steel lid with locking ring, gasket and lifting eye. The 1-1/2" x 30" long mixing shaft attaches to the motor coupler & (2) 16" diameter 4-bladed axial impellers with set screws. A PTFE lip seal is included. All wetted parts are 316 stainless steel for chemical resistance. Standard models are configured for 350-gallon totes although customizations can be made for other tote sizes by quote. Impellers, seals and finish options are available to suit food and other sanitary industry requirements.
Motor
| Horsepower | 2 |
| Motor Enclosure | EP |
| MotorRPM | 1755 |
| Motor Type | Electric |
| Baldor Model or Equivalent | VEM3558T |
| Motor Frame | 145TC |
| Motor Exterior | Painted Steel |
| Phase | 3 |
| Voltage | 230/460 |
| Hertz | 60 |
| FL Amps | 2.9 A |
| ServiceFactor | 1.15 |
| InsulationClass | F |
| Drive | Gear Reduced |
| Gearbox Ratio | 10:1 |
| Gearbox RPM | 175 |
Impeller
| Quantity | 2 |
| Diameter | 16" |
| Style | ATI |
| Rotation | Left Hand |
| Center Hole | 1-1/2" |
| Design | 4 Bladed Axial |
| Material Construction | 316 SS |
| Set Screw | 2 |
| Surface Finish | Mill |
Shaft
| Exposed Dimensions | 1-1/2" x 30" |
| Construction | 316 SS |
| Surface Finish | Ground & Polished |
General
| Warranty | 1 Year Warranty against defective materials and workmanship. All component parts of our products are covered by this warranty, except for normal wear items such as belts or impellers. |
| Shipping Carrier | Small Parcel |
| FOB | New Albany, IN |
Model Number: STL-200E
The INDCO STL-series mixer is designed for mixing liquid products in stainless steel intermediate bulk containers (IBC’s), or “totes”. Inspired by the many unique mixers created for our customers for this purpose, STL mixers can be configured to process liquids with a wide range of properties and meet many operational requirements. The STL-200E is our 2 HP electric model and is 10:1 gear reduced. The 2 HP electric motor model is an explosion proof motor and requires three phase 230/460 voltage. This unit is equipped with motor leads only and operates at 175 RPM. The model includes a stainless steel lid with locking ring, gasket and lifting eye. The 1-1/2" x 30" long mixing shaft attaches to the motor coupler & (2) 16" diameter 4-bladed axial impellers with set screws. A PTFE lip seal is included. All wetted parts are 316 stainless steel for chemical resistance. Standard models are configured for 350-gallon totes although customizations can be made for other tote sizes by quote. Impellers, seals and finish options are available to suit food and other sanitary industry requirements.
Motor
| Horsepower | 2 |
| Motor Enclosure | EP |
| MotorRPM | 1755 |
| Motor Type | Electric |
| Baldor Model or Equivalent | VEM3558T |
| Motor Frame | 145TC |
| Motor Exterior | Painted Steel |
| Phase | 3 |
| Voltage | 230/460 |
| Hertz | 60 |
| FL Amps | 2.9 A |
| ServiceFactor | 1.15 |
| InsulationClass | F |
| Drive | Gear Reduced |
| Gearbox Ratio | 10:1 |
| Gearbox RPM | 175 |
Impeller
| Quantity | 2 |
| Diameter | 16" |
| Style | ATI |
| Rotation | Left Hand |
| Center Hole | 1-1/2" |
| Design | 4 Bladed Axial |
| Material Construction | 316 SS |
| Set Screw | 2 |
| Surface Finish | Mill |
Shaft
| Exposed Dimensions | 1-1/2" x 30" |
| Construction | 316 SS |
| Surface Finish | Ground & Polished |
General
| Warranty | 1 Year Warranty against defective materials and workmanship. All component parts of our products are covered by this warranty, except for normal wear items such as belts or impellers. |
| Shipping Carrier | Small Parcel |
| FOB | New Albany, IN |
15 Business Days * Orders in quantity or with other items may extend lead times.
